DMTG DL25MH CNC Turning Center with 12-Position L | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The DMTG DL25MH is an automatic CNC turning center configured for shaft and disc machining. Its listed capacity includes a 520 mm maximum swing over the bed, maximum turning diameters of 310 mm for shaft work and 500 mm for disc work, and a choice of 1,000 mm or 1,500 mm maximum turning length.
The machine uses a 10-inch chuck, an A2-8 spindle nose, an 87 mm spindle bore, and a spindle speed of up to 3,500 rpm. The specification lists an integrally cast, 45-degree inclined bed and a choice of box ways or linear guideways for the 1,000 mm configuration.
The X-axis travel is 260 mm, while the listed Z-axis travel is 1,040 mm or 1,600 mm. Rapid traverse depends on the guideway configuration: 12/12 m/min for X/Z with box ways or 24/16 m/min with linear guideways. A 12-position live-tooling turret is specified, with a 25 × 25 mm tool-shank size.
Adjacent and farthest indexing times are listed as 0.94 and 1.33 seconds. The tailstock has a 100 mm quill diameter and 139 mm quill stroke. Listed controller choices are FANUC 0i-TF Plus and Siemens 828D.
Spindle motor power is shown as 18.5/22 kW, and machine weight is listed as 7,800/8,300 kg, indicating configuration-dependent values.
Published accuracy figures include X(C)-axis positioning accuracy of 0.011 mm, Z-axis positioning accuracy of 0.018/0.021 mm, X(C)-axis repeatability of 0.004 mm, and Z-axis repeatability of 0.007/0.009 mm.
Buyers should confirm which values apply to the selected bed length, guideway, controller, and axis configuration. Before procurement, confirm the exact controller, guideway type, turning length, spindle motor rating, machine weight, and accuracy specification included in the quotation.
Buyers should also request the final machine layout, electrical requirements, tooling and chuck scope, live-tooling capabilities, applicable CE and ISO 9001 documentation, acceptance-test procedure, delivery schedule, installation responsibilities, and details of the stated one-year warranty and local or online after-sales service.
DMTG | Applications and Buyer Notes
DMTG is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questi
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- DL25MHBased on visible page data; confirm exact value in the RFQ.
- Turret
- 12-position live-t ing turretBased on visible page data; confirm exact value in the RFQ.
- Chuck size
- 10 inBased on visible page data; confirm exact value in the RFQ.
- Machine type
- CNC turning centerBased on visible page data; confirm exact value in the RFQ.
- Spindle bore
- 87 mmBased on visible page data; confirm exact value in the RFQ.
- Spindle nose
- A2-8Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
TCK56-500 Slant-Bed CNC Turning Center with A2-6 SpindleRequest Quote
VM10U 5-Axis Vertical CNC Machining Center with Direct-Drive A/C AxesRequest Quote
T1000 Compact 3/4/5-Axis CNC Vertical Machining Center with 1000 × 500 × 450 mm TravelRequest Quote
VMC1160 4-Axis BT40 Vertical CNC Machining Center with 1100 × 600 × 600 mm TravelRequest Quote
WELLON TCK700B 12-Inch Box-Guideway Slant-Bed CNC Turning LatheRequest Quote
JT VMC855V Heavy-Duty 3-Axis Vertical CNC Machining CenterRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...