JT VMC855V Heavy-Duty 3-Axis Vertical CNC Machini | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
Product overview The JT VMC855V is a heavy-duty, three-axis vertical CNC machining center intended for metal-cutting operations. Its listed X/Y/Z travel is 800/550/550 mm, and the 1000 × 550 mm worktable supports loads up to 600 kg.
The specification table lists a BT40 spindle, a maximum spindle speed of 12,000 rpm, and continuous/30-minute spindle power ratings of 11/15 kW. Production features The machine provides rapid traverse rates of 30 m/min on all three axes and a feed rate of 12,000 mm/min.
Its automatic tool-change system has a 24-tool magazine and a listed tool-to-tool change time of 2 seconds. Maximum tool dimensions are listed as 65 mm outer diameter when fully loaded, 100 mm for the adjacent-empty-pocket condition, 160 mm length, and 2 kg weight.
Supporting equipment described for the machine includes centralized lubrication, a coolant system, and a full protective enclosure. Accuracy and installation data Listed positioning accuracy is P0.01, with ±0.004 mm over 300 mm also stated. Listed repeatability is Ps0.008, with ±0.003 mm also stated.
The machine requires 15 kVA electrical capacity and at least 5.5 kg/cm² air pressure. Cutting-fluid capacity is 250 liters. The approximate footprint is 2400 × 2350 mm, approximate height is 2750 mm, and approximate machine weight is 5200 kg.
Buyer confirmation before ordering Confirm whether the offered machine is designated VMC855, VMC855V, or JT-855V on the final quotation and nameplate. Verify the selected CNC control, because GSK, Fanuc, Siemens, Mitsubishi, Syntec, KND, and KT systems are listed as options.
Confirm spindle speed and configuration, as the descriptive text also mentions an 8000 rpm spindle while the parameter table lists 12,000 rpm.
Buyers should also confirm the transmission-mode entry, exact accuracy test standard and acceptance procedure, electrical voltage and frequency, included tooling and accessories, optional fourth axis, chip conveyor or high-speed spindle, final machine dimensions and weight, packing details, commissioning requirements, customization scope, warranty coverage, and the practical terms of the listed 24-hour online technical support.
JT | Applications and Buyer Notes
JT is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time question
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- T-slots
- 18 × 100 × 5 mmBased on visible page data; confirm exact value in the RFQ.
- Feed rate
- 12,000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Application
- Metal processing and metal cuttingBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 3-axis vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- X/Y/Z travel
- 800 / 550 / 550 mmBased on visible page data; confirm exact value in the RFQ.
- Repeatability
- Ps0.008;±0.003 mm also listed individually in the source facts.Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
LEYO G1311 Heavy-Duty 3-Axis CNC Vertical Machining CenterRequest Quote
VMC850 3-Axis CNC Vertical Machining Center with BT40 8000 rpm Spindle and 24-Tool ATCRequest Quote
VMC1050 Heavy-Duty CNC Vertical Machining Center with BT40 Spindle and 24-Tool MagazineRequest Quote
High Precision 50c CNC Vertical Milling Machine China 5-Axis Machining Center - Horizontal CNC MilliRequest Quote
VMC1160 4-Axis BT40 Vertical CNC Machining Center with 1100 × 600 × 600 mm TravelRequest Quote
VM10U 5-Axis Vertical CNC Machining Center with Direct-Drive A/C AxesRequest QuoteCNCMillHub related sourcing paths
High Precision Machining Projects
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...