TCK56-500 Slant-Bed CNC Turning Center with A2-6 | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The TCK56-500 is a floor-mounted horizontal CNC turning center configured for automatic metal cutting. Its inclined guide-rail design is paired with an integral A2-6 spindle unit and an 8-inch chuck.
Published working capacities include a 560 mm maximum swing over the bed, a 500 mm maximum cutting length, and a 50 mm maximum bar passage through the 65 mm spindle bore. The spindle provides stepless speed adjustment from 50 to 4500 r/min and a stated maximum output torque of 177 Nm.
Main-motor output is specified as 11 kW rated and 15 kW for 15 minutes. X- and Z-axis rapid-traverse speeds are both listed at 30 m/min, with 200 mm X-axis travel and 560 mm Z-axis travel. Machining accuracy is stated as IT6. Tooling capacity depends on the selected configuration.
The available data distinguishes between an eight-station arrangement, associated with a 280 mm standard and 350 mm maximum cutting diameter, and a twelve-station arrangement, associated with a 210 mm standard and 280 mm maximum cutting diameter.
Buyers should obtain a configuration-specific technical sheet before ordering rather than assuming that every value applies to the same build. The machine is stated to be new, hydraulically powered, and supplied without a tailstock travel specification;the listed tailstock sleeve taper is Morse No. 5.
CE, GS, RoHS, and ISO 9001 are identified for the product. A five-year warranty is stated, covering free replacement of parts damaged by non-human factors.
Procurement confirmation: Ask the seller to identify the exact turret or tool-holder configuration, CNC control, included chuck and tooling, electrical standard, coolant and chip-handling equipment, guarding, installation requirements, acceptance-test procedure, and documentation supplied.
Confirm whether a tailstock is included, reconcile the stated machine and packed dimensions, review certification documents for the ordered configuration, and obtain written warranty exclusions, service procedures, delivery terms, and inspection criteria before purchase.
TCK56-500 | Applications and Buyer Notes
TCK56-500 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time q
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Chuck
- 8 inch TCK56-500 slant-bed CNC turning center with an A2-6 spindle nose, 65 mm sBased on visible page data; confirm exact value in the RFQ.
- Model
- TCK56-500Based on visible page data; confirm exact value in the RFQ.
- Guide rail
- Inclined guide railBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Horizontal CNC lathe / slant-bed turning centerBased on visible page data; confirm exact value in the RFQ.
- Spindle bore
- 65 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC650 CNC Vertical Machining Center with Fanuc Control and BT40 SpindleRequest Quote
LJ-855 VMC850 Vertical CNC Machining Center with 800 × 500 × 500 mm TravelRequest Quote
FRT-3018 Table-Moving Double-Column CNC Gantry Machining CenterRequest Quote
WELLON TCK700B 12-Inch Box-Guideway Slant-Bed CNC Turning LatheRequest Quote
VMC-U500 5-Axis Vertical CNC Machining Center for Complex Precision PartsRequest Quote
LEAPS VTE5035 Vertical CNC Turning and Milling Center for Metal CuttingRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...