VMC855 3-Axis Vertical CNC Machining Center with | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC855 is a new 3-axis vertical CNC machining center intended for metal processing and CNC metal-cutting operations.
The published configuration identifies a 1000 × 550 mm worktable with a maximum stated load of 500 kg, a BT40 spindle interface, closed-loop contour control, and a 24-position automatic tool magazine. Cutting feed is listed as 1–10,000 mm/min, while tool-change time is stated as 2.5 seconds.
Supported configuration details include belt-drive spindle transmission, a stated 7.5/11 kW spindle motor, five 18 mm T-slots at 90 mm spacing, and an optional configuration listing 30-bar coolant through the spindle. Rapid traverse is reported as either 24/24/18 m/min or 32/32/24 m/min, depending on configuration.
The machine is listed at approxima e. Axis travel appears as both 850/600/600 mm and 800/550/550 mm. Maximum spindle speed appears as both 12,000 rpm and 10,000 rpm. The tool magazine is described as both umbrella-type and arm-type, and multiple machine or package dimensions are reported.
Buyers should treat these values as configuration-dependent or unconfirmed until they are incorporated into a signed specification sheet.
Before ordering, confirm the exact X/Y/Z travel, spindle speed and drive configuration, ATC mechanism, CNC control system, electrical supply, coolant-through-spindle inclusion, accuracy acceptance method, machine dimensions, shipping dimensions, and included accessories.
The stated positioning figures, certifications, warranty coverage, and applicable test standards should also be verified against documents for the exact machine offered.
A practical acceptance plan should define the test workpiece, inspection instruments, positioning test procedure, tool-change test, spindle runout check, and required documentation before shipment.
VMC855 | Applications and Buyer Notes
VMC855 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time ques
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VMC855Based on visible page data; confirm exact value in the RFQ.
- T-slots
- 5 slots;18 mm width;90 mm spacingBased on visible page data; confirm exact value in the RFQ.
- ATC type
- Conflicting descriptions: umbrella-type or arm-typeBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Cutting feed
- 1–10,000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 3-axis vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 650 Mm Travel 3 Axis Vertical Cnc Machining Center With Bt40 SpindleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
XH7126 3-Axis CNC Vertical Machining Center with BT40 SpindleRequest Quote
VMC650–VMC1160 Vertical CNC Machining Centers with 3-Axis and Optional 4-Axis ConfigurationsRequest Quote
VMC 1160 3-Axis CNC Vertical Machining Center with 1100 × 600 × 620 mm TravelRequest Quote
Timeway VMC650 3-Axis CNC Vertical Machining Center with 1000 × 420 mm TableRequest Quote
JT VMC855V Heavy-Duty 3-Axis Vertical CNC Machining CenterRequest Quote
VMC850 3-Axis Vertical CNC Machining Center with 800 × 500 × 500 mm TravelRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...