VMC650–VMC1160 Vertical CNC Machining Centers wit | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC series comprises vertical CNC machining centers intended for metal-cutting operations. Detailed specifications are provided for the VMC650, VMC850, VMC855, and VMC1160. These models offer X-axis travel from 650 to 1,100 mm, Y-axis travel from 500 to 600 mm, and Z-axis travel from 500 to 600 mm.
Maximum worktable load ranges from 400 to 800 kg, depending on the selected model. Each listed model has an 8,000 rpm BT40 spindle and a 24-position disc-type tool magazine. Main motor ratings range from 5.5 to 11 kW.
Published rapid-traverse rates vary by model, from 24/24/20 m/min on the VMC650 and VMC850 to 36/36/36 m/min on the VMC855 and 36/36/24 m/min on the VMC1160. Listed positioning accuracy is 0.005 mm per 300 mm, with repeat positioning accuracy of 0.003 mm per 300 mm.
The described construction uses roller linear guides on all three axes, pre-tensioned ball screws, and direct coupling between the servo motors and ball screws. The Z axis uses a braked servo motor without a counterweight.
Standard equipment is listed as including a 24-tool magazine, automatic lubrication system, chain-type chip conveyor, GSK CNC system, linear guides, manual pulse generator, ball screws, and spindle unit.
Available options include a fourth or fifth CNC axis, direct-drive spindle, spindle oil cooler, tool setter, workpiece measuring device, and alternative CNC systems such as Fanuc, KND, Mitsubishi, Siemens 828D, and SYNTEC. Customization is listed as available.
CE and ISO 9001 certifications are stated for the product listing.
Before procurement, buyers should confirm the exact model and axis configuration because the broader series name also references VMC1060, VMC1370, and VMC1580, while the supplied parameter table contains detailed values only for VMC650, VMC850, VMC855, and VMC1160.
Buyers should also verify the final CNC controller, spindle configuration, electrical standard, included accessories, inspection method, machine footprint, packed dimensions, installation requirements, and acceptance criteria in the purchase specification.
VMC650–VMC1160 | Applications and Buyer Notes
VMC650–VMC1160 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-t
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Table size
- 500 × 800 / 500 × 1000 / 550 × 1000 / 600 × 1200 mmBased on visible page data; confirm exact value in the RFQ.
- Application
- Metal cuttingBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Vertical CNC milling and machining centerBased on visible page data; confirm exact value in the RFQ.
- Spindle taper
- BT40Based on visible page data; confirm exact value in the RFQ.
- Tool magazine
- 24-t disc-type magazineBased on visible page data; confirm exact value in the RFQ.
- X-axis travel
- 650 / 800 / 800 / 1100 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 650 Mm Travel 3 Axis Vertical Cnc Machining Center With Bt40 SpindleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC 1160 3-Axis CNC Vertical Machining Center with 1100 × 600 × 620 mm TravelRequest Quote
Timeway VMC650 3-Axis CNC Vertical Machining Center with 1000 × 420 mm TableRequest Quote
650 mm Travel 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
VMC850 3-Axis Vertical CNC Machining Center with 800 × 500 × 500 mm TravelRequest Quote
GT DMTG VMC850 3-Axis Vertical CNC Machining Center with 1000 × 500 mm TableRequest Quote
VMC-U500 5-Axis Vertical CNC Machining Center for Complex Precision PartsRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...