VMC1370 CNC Vertical Machining Center with GSK Co | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC1370 is a CNC vertical machining center intended for metalworking, mechanical component processing, and moldmaking. Its stated process range includes rough and finish milling, drilling, tapping, and boring. The technical table identifies three-axis travel of 1300 mm in X, 700 mm in Y, and 600 mm in Z.
The worktable measures 1360 × 700 mm and has a listed maximum load of 1200 kg. Rapid movement rates are stated as 12/12/8 m/min for the X/Y/Z axes, while the feed-rate range is 1–6 m/min. The spindle specification lists belt drive, BT50 taper, speed up to 8000 rpm, and a 15 kW AC servo spindle motor.
A 24-tool automatic tool changer is listed, with maximum tool weight of 18 kg.
Construction and equipment details include resin-sand construction, linear guideways, precision-ground ball screws, centralized automatic lubrication, a chip-fluid system, spindle air cleaning, work lighting, a separate handwheel, an RS232 interface, a three-color warning light, and an electrical-cabinet heat exchanger.
The machine is listed with a GSK 998 CNC system. Stated JIS positioning accuracy is ±0.020 mm, and stated repeat positioning accuracy is ±0.010 mm. Important procurement note: the supplied information contains configuration conflicts.
The marketing title refers to four- and five-axis capability, but the technical table describes three-axis travel. It also lists a BT50 spindle in one section and a BT40 spindle among the standard accessories, while two different overall machine dimensions appear.
Buyers should therefore request a configuration-specific technical sheet and written quotation before ordering.
Confirm the required axis count, rotary-axis scope, CNC system, spindle taper and power, tool-changer arrangement, machine footprint, electrical supply, included accessories, installation requirements, acceptance test, delivery schedule, and applicable warranty terms.
If machining accuracy is critical, agree on the test standard, test piece, inspection method, and acceptance limits in the purchase contract.
VMC1370 | Applications and Buyer Notes
VMC1370 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VMC1370Based on visible page data; confirm exact value in the RFQ.
- Table slots
- 5 × 18 × 152 mm, listed as T slotsBased on visible page data; confirm exact value in the RFQ.
- Machine type
- CNC vertical machining centerBased on visible page data; confirm exact value in the RFQ.
- X/Y/Z travel
- 1300/700/600 mmBased on visible page data; confirm exact value in the RFQ.
- Spindle drive
- BeltBased on visible page data; confirm exact value in the RFQ.
- Spindle motor
- 15 kW AC servoBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC850/VMC855 Vertical CNC Machining Center with Fanuc 0i-MF ControllerRequest Quote
VTE5035 5-Axis CNC Vertical Machining Center with Fanuc 0i-MF(5) ControlRequest Quote
VMC1160, VMC1270 and VMC1370 CNC Vertical Machining Centers with BT40 SpindleRequest Quote
VTC Series Vertical CNC Graphite Machining Center with FANUC ControlRequest Quote
VMC850 3-Axis CNC Vertical Machining Center with BT40 Spindle and 24-Tool ATCRequest Quote
Antishi Contour Control EDM CNC Machining Center Vertical Milling Machine Lathe in China - HorizontaRequest QuoteCNCMillHub related sourcing paths
High Precision Machining Projects
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...