VMC1160, VMC1270 and VMC1370 CNC Vertical Machini | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC1160, VMC1270 and VMC1370 are CNC vertical machining centers intended for metal-cutting work. The three configurations provide progressively larger working envelopes and table capacities, allowing buyers to select a machine around part size, fixture footprint and load requirements.
The VMC1160 has travels of 1100 × 600 × 600 mm and a 1200 × 600 mm worktable rated for a maximum load of 800 kg. The VMC1270 increases the travels to 1200 × 700 × 600 mm, with a 1300 × 700 mm table and 1000 kg maximum load.
The VMC1370 provides 1300 × 700 × 700 mm travels, a 1400 × 700 mm table and a maximum load of 1200 kg. All three listed configurations use an 8000 rpm BT40-150 spindle and a 24-tool arm-type automatic tool changer. The stated maximum tool dimensions are 120 mm diameter, 300 mm length and 8 kg weight.
Published positioning accuracy is 0.008 mm, while repeat accuracy is listed as 0.005 mm. Cutting feed is specified as 1–10,000 mm/min.
Standard equipment includes a Fanuc 0i-MF(5) controller, belt-type spindle, ball leadscrews, three-axis linear guideways, full enclosure, manual pulse generator, cabinet air conditioner, USB and Ethernet interfaces, work lamp, safety door, chain-type chip conveyor, alarm lamp, air and water guns, automatic lubrication, coolant system, high-pressure flushing and rigid tapping.
Optional equipment listed for the range includes a 12,000 rpm direct-driven spindle, spiral chip conveyor, nitrogen balance cylinder, spindle-center coolant at 20 or 30 bar, BBT40 or SK40 spindle tapers, a TS27R tool probe, an OMP60 workpiece measurement device and an oil skimmer.
Before procurement, confirm the exact model and final configuration in the quotation. In particular, buyers should verify whether any requested fourth- or fifth-axis capability is included, because the detailed parameter table describes X, Y and Z travel but does not define rotary-axis specifications.
The selected controller, spindle construction, taper, probing equipment, coolant option, electrical supply and accessory package should also be documented. Buyers should request dimensional drawings, foundation requirements, acceptance criteria and a final packing specification before approving the order.
VMC1160 | Applications and Buyer Notes
VMC1160 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Cutting feed
- 1–10,000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Tool changer
- 24-t arm typeBased on visible page data; confirm exact value in the RFQ.
- X/Y/Z travel
- VMC1160: 1100/600/600 mm;VMC1270: 1200/700/600 mm;VMC1370: 1300/700/700 mmBased on visible page data; confirm exact value in the RFQ.
- Customization
- AvailableBased on visible page data; confirm exact value in the RFQ.
- Spindle speed
- 8000 rpmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
BL-V8 / BL-V11 Vertical CNC Machining Centers with BT40 Spindle and 24-Tool ATCRequest Quote
VMC650 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
VMC1370 CNC Vertical Machining Center with GSK Control, 1300 × 700 × 600 mm TravelRequest Quote
FD3018 Vertical CNC Gantry Machining Center with 1600 × 3000 Table and BT50 SpindleRequest Quote
PL1375LC 3-Axis Linear-Guide CNC Vertical Machining Center FrameRequest Quote
DMTG 9 Axis Turn-Milling Machining Center - DMTG MACHINE TOOLRequest QuoteCNCMillHub related sourcing paths
Tooling And Fixture Procurement
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...