VMC850 3-Axis CNC Vertical Machining Center with | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC850 is a 3-axis CNC vertical machining center configured for metal-cutting and general machining operations. Its specified working envelope includes 800 mm X-axis travel, 500 mm Y-axis travel, and 500 mm Z-axis travel. The machine has a 1000 × 500 mm worktable with three 18 mm T-slots on 130 mm pitch.
The spindle uses a BT40 taper and has a stated maximum speed of 8000 rpm, with 10000 rpm and 12000 rpm configurations listed as options. Main motor power is specified as 7.5/11 kW. Rapid traverse rates are 24 m/min on X and Y and 20 m/min on Z, while the stated cutting-feed range is 1–8000 mm/min.
Linear guideways are specified. For tool handling, the parameter table lists a 24-tool arm-type magazine. Maximum tool diameter is 78 mm with adjacent pockets occupied or 120 mm when neighboring pockets are open, and maximum tool weight is 8 kg.
The machine specification states positioning accuracy of ±0.008 mm and repeat positioning accuracy of ±0.005 mm.
Standard equipment listed for the machine includes automatic lubrication, cooling and pneumatic systems, a heat exchanger, spindle-center coolant, a full enclosure, an air system with air gun, and an air conditioner.
Available options include FANUC, Siemens, or GSK control systems, fourth- or fifth-axis capability, and an automatic chip conveyor. Procurement notes: Buyers should confirm the final machine configuration before ordering.
In particular, verify the selected CNC control, spindle speed, motor rating, tool-changer design and capacity, worktable load, axis configuration, included accessories, electrical requirements, and final overall dimensions.
The source contains conflicting worktable-load, overall-dimension, tool-magazine, and warranty information, so these items should be documented in the quotation and purchase specification.
Buyers should also request the applicable certification documents and agree on acceptance-test methods for positioning and repeat-positioning accuracy.
VMC850 | Applications and Buyer Notes
VMC850 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time ques
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VMC850Based on visible page data; confirm exact value in the RFQ.
- T-slots
- 3 slots, 18 mm width, 130 mm pitchBased on visible page data; confirm exact value in the RFQ.
- Table size
- 1000 × 500 mmBased on visible page data; confirm exact value in the RFQ.
- Cutting feed
- 1–8000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Guideway type
- Linear railBased on visible page data; confirm exact value in the RFQ.
- Spindle taper
- BT40Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC850 3-Axis CNC Vertical Machining Center with BT40 8000 rpm Spindle and 24-Tool ATCRequest Quote
VMC850 CNC Vertical Machining Center with 16-Tool ATC and BT40 SpindleRequest Quote
VMC650 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
BORUI VMC650 3-Axis CNC Vertical Machining Center with BT40 SpindleRequest Quote
TAIZ TZ-U320 Vertical 5-Axis CNC Machining Center with 320 mm Rotary TableRequest Quote
LEYO G1311 Heavy-Duty 3-Axis CNC Vertical Machining CenterRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...