SZGH-650 4-Axis Vertical CNC Machining Center wit | RFQ Sourcing Details

The SZGH-650 is a vertical CNC machining center offered as a four-axis machine-and-controller combination. Its fourth-axis rotary table is intended to support multi-face, three-dimensional machining with fewer workpiece setups. The listed functions include CNC milling and drilling for metal processing.

Supported machine data The SZGH-650 has a 600 × 500 mm effective working surface and listed X-, Y-, and Z-axis travels of 500, 600, and 300 mm. The stated distance from the table surface to the spindle end ranges from 150 to 450 mm.

Published performance data includes 0.01 mm repeatability, rapid traverse rates of 30 m/min on X and Y and 25 m/min on Z, plus a suggested cutting speed of 10 m/min.

The available spindle specifications include BT40 or BT30 taper, mechanical or electric spindle types, and maximum spindle-speed choices of 6,000 or 24,000 rpm. Listed spindle motor choices are 3.7, 5.5, and 7.5 kW. Tool-magazine choices are stated as 10 or 12 positions.

The source also describes an optional arrangement with a 5.5 kW, 6,000 rpm BT40 spindle and a 12-station linear pneumatic tool changer.

Published capacity figures for the SZGH-650 include maximum drilling diameters of 40 mm in aluminum and 30 mm in steel, maximum tapping diameters of M25 in aluminum and M20 in steel, and a maximum milling-cutter diameter of 100 mm.

The application section additionally identifies copper, iron, aluminum, and stainless-steel bar processing within a 600 × 500 mm area. These are supplier-listed capabilities and should be validated against the intended alloy, tooling, workholding, cutting conditions, and required tolerances.

The listed machine dimensions are 1,650 × 1,800 × 2,450 mm, with a total machine weight of 2,900 kg. Separate shipping data gives a package size of 200 × 180 × 255 cm and gross package weight of 3,330 kg. The machine is described as packed in a wooden box.

Procurement questions to confirm Before ordering, confirm the exact spindle speed, spindle taper, motor power, tool-magazine capacity, controller panel, rotary-table center height, and fourth-axis motor included in the quotation.

Buyers should also verify whether the offered system is a factory four-axis configuration or a base machine supplied with an added rotary axis.

Request a signed configuration sheet covering axis travels, table load, positioning accuracy, repeatability, electrical requirements, coolant and lubrication equipment, guarding, probing or measurement functions, tooling interfaces, and all included accessories.

The source states that its configuration parameters are for reference and that the quoted configuration and physical acceptance criteria prevail.

Confirm the test method and acceptance limits for the intended parts, including material grade, workpiece size and mass, feature tolerances, surface-finish requirements, cycle-time target, and representative cutting trial.

Also clarify installation requirements, commissioning, operator training, documentation, spare-parts coverage, remote support arrangements, delivery schedule, and the exact scope and exclusions of the stated one-year warranty.