VMC650 3-Axis CNC Vertical Machining Center with | RFQ Sourcing Details

The VMC650 is a 3-axis CNC vertical machining center configured for metalworking operations such as drilling, hole expansion, reaming, tapping, surface and step milling, groove milling, bevel-edge work, and machining curves, curved surfaces, and cams.

Its published working envelope includes 650 mm X-axis travel, 450 mm Y-axis travel, and 510 mm Z-axis travel. The worktable measures 900 × 400 mm and is rated for a maximum load of 500 kg. The listed spindle configuration uses a BT40 taper, an 8,000 rpm maximum speed, and a 5.5 kW main motor.

A 10,000 rpm spindle is listed as an option. The distance from the spindle nose to the worktable is specified as 100–600 mm, while the distance from the spindle axis to the column surface is 550 mm. Rapid traverse is listed as 36 m/min on each axis, and cutting feed is adjustable from 1 to 10,000 mm/min.

The machine uses linear guideways on the X, Y, and Z axes. Its table has three T-slots, each listed as 14 mm wide with 80 mm pitch. Published accuracy values are ±0.0075 mm for positioning and ±0.005 mm for repeat positioning.

The standard specification table lists a 16-tool armless magazine, with a maximum tool diameter of 90 mm and maximum tool weight of 8 kg.

Other parts of the supplied information mention arm-type magazines in 16-, 20-, or 24-tool configurations, so the exact magazine supplied should be recorded in the purchase specification.

Listed standard equipment includes a GSK controller, tool magazine, automatic lubrication, air cooling, cooling system, sizing blocks, NSK bearings, and an R+W coupling.

Available options include a CNC dividing head, NC rotary table, automatic chip conveyor, fourth axis, bar feeder, alternative controllers, and other spindle or magazine configurations.

Because standard and optional descriptions vary within the supplied information, buyers should obtain a line-item configuration sheet for the specific machine before ordering.

For procurement review, confirm the controller model and software options, spindle speed and taper, motor rating, tool-magazine type and capacity, electrical voltage, rotary-axis preparation, coolant and chip-management equipment, and all included accessories.

Buyers should also agree on the applicable accuracy inspection method, acceptance report, certification documents, final machine dimensions and weight, installation requirements, operator documentation, technical support scope, and warranty conditions.

These items should be treated as confirmation questions rather than assumed features unless they appear in the final signed configuration.