KMX-2585 Moving Column CNC Machining Center with | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The KMX-2585 is a moving-column CNC machining center intended for milling, drilling, tapping, and chamfering metal workpieces, including long parts. The listed application covers steel, copper, and aluminum processing. Supported machine configuration The stated X/Y/Z travels are 2500 mm, 850 mm, and 900 mm.
The table specification is shown as two 550 × 500 mm areas, with a listed maximum load of 2,000 kg. The spindle nose-to-table distance is specified as 50–950 mm. The machine is listed with an HSK 63A direct-drive spindle rated at 15 kW, 43 N·m, and up to 15,000 rpm.
Rapid feed rates are stated as 40/36/36 m/min for the X/Y/Z axes, while the cutting-feed range is 1–10,000 mm/min. Published accuracy data cites GB/T 18400.4 and gives X/Y/Z positioning accuracy of 0.03/0.025/0.025 mm and repeatability of 0.013/0.01/0.01 mm.
The product is described as new and lists CE and ISO 9001 certification. Online after-sales support and a one-year warranty are also stated. Tooling information requires clarification before purchase. One specification lists a 32-tool magazine, while the descriptive text refers to a 24-station arm-type disc magazine.
The listed maximum tool weight is 8 kg, maximum tool length is 350 mm, and the holder type is HSK 63A. Procurement points to confirm Before ordering, buyers should request a signed configuration sheet that resolves the 24-versus-32-tool magazine discrepancy and confirms the exact dual-table arrangement.
Confirm the CNC control make and model, electrical supply, coolant and chip-management equipment, included tooling, guarding, installation requirements, acceptance-test method, and the options included in the final quotation.
Buyers should also verify that the stated accuracy values apply to the offered configuration and agree on how they will be measured during acceptance. For logistics planning, the listed package size is 400 × 230 × 260 cm with a gross weight of 4,600 kg.
The stated transport package is a wooden box or a customized package. Final packed dimensions, lifting points, foundation requirements, freight arrangements, commissioning scope, delivery schedule, warranty coverage, and availability of local service should all be confirmed in the purchase contract.
KMX-2585 | Applications and Buyer Notes
KMX-2585 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time qu
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- KMX-2585Based on visible page data; confirm exact value in the RFQ.
- Table area
- 2 × 550 × 500 mm, as listedBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Moving-column CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- Spindle power
- 15 kWBased on visible page data; confirm exact value in the RFQ.
- Spindle taper
- HSK 63ABased on visible page data; confirm exact value in the RFQ.
- X-axis travel
- 2500 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
LM-3227 Double-Column CNC Gantry Machining Center with BT50 SpindleRequest Quote
VMC1160 4-Axis BT40 Vertical CNC Machining Center with 1100 × 600 × 600 mm TravelRequest Quote
SKX Series CNC Double-Column Gantry Milling and Boring Machining CenterRequest Quote
SKX Series CNC Gantry Double-Column Machining Center for Metal ProcessingRequest Quote
VM10U 5-Axis Vertical CNC Machining Center with Direct-Drive A/C AxesRequest Quote
JT VMC855V Heavy-Duty 3-Axis Vertical CNC Machining CenterRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...