LM-3227 Double-Column CNC Gantry Machining Center | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The LM-3227 is a double-column CNC gantry machining center designed for milling, boring, drilling, and tapping in a single workpiece setup. Its specified working envelope includes 3200 mm X-axis travel, 2760 mm Y-axis travel, and 1000 mm Z-axis travel.
The 3000 × 2100 mm worktable supports a stated maximum load of 10,000 kg, while the distance between columns is 2500 mm and the workpiece through height is 1200 mm. The machine uses roller linear guideways on the X, Y, and Z axes and direct-connected ball-screw drives.
Its BT50 mechanical spindle is rated at 6000 rpm and is driven by a 22/26 kW spindle motor. Published feed data includes 12 m/min rapid feed on all three axes and maximum cutting feed rates of 10/8/8 m/min for X/Y/Z. Stated positioning accuracy is 0.02/1000 mm, with repeat positioning accuracy of 0.015/1000 mm.
The listed configuration includes a 32-tool BT50 chain-type automatic tool changer. An air-curtain system protects the spindle unit from cutting fluid, dust, and contaminants.
Optional configurations identified for this model include through-spindle coolant, a gearbox spindle for heavy cutting, and a 90-degree angle milling head. CNC control choices are listed as FANUC, Siemens, or Mitsubishi, subject to the ordered configuration.
Procurement questions to confirm: Buyers should verify the selected CNC control, spindle and gearbox configuration, tool magazine, through-spindle coolant requirement, angle-head requirements, electrical standard, final accuracy acceptance method, and any requested customization.
The workpiece envelope, tooling access, fixture mass, center of gravity, cutting process, chip and coolant requirements, installation foundation, site access, and commissioning plan should also be reviewed before ordering.
Confirm the final machine layout, packed dimensions, training arrangement, delivery schedule, packing method, warranty scope, and applicable trade terms in the purchase contract.
LM-3227 | Applications and Buyer Notes
LM-3227 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- LM-3227Based on visible page data; confirm exact value in the RFQ.
- Spindle
- BT50 mechanical spindle, 6000 rpmBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Double-column CNC gantry machining centerBased on visible page data; confirm exact value in the RFQ.
- X/Y/Z travel
- 3200 / 2760 / 1000 mmBased on visible page data; confirm exact value in the RFQ.
- Guideway type
- X/Y/Z roller linear guidewaysBased on visible page data; confirm exact value in the RFQ.
- Spindle motor
- 22/26 kWBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
FD3018 Vertical CNC Gantry Machining Center with 1600 × 3000 Table and BT50 SpindleRequest Quote
GMC1220RV 3-Axis Gantry CNC Machining Center with BT50 SpindleRequest Quote
FUKEDA FD3018 Heavy-Duty Double-Column CNC Gantry Machining CenterRequest Quote
SKX Series CNC Double-Column Gantry Milling and Boring Machining CenterRequest Quote
TIMAC G Series Hard-Guide Gantry CNC Machining CenterRequest Quote
VTC Series Vertical CNC Graphite Machining Center with FANUC ControlRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...