GT DMTG VMC850 3-Axis Vertical CNC Machining Cent | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The GT DMTG VMC850 is a 3-axis vertical CNC machining center specified for metal processing. Its 1000 × 500 mm worktable supports a maximum load of 600 kg, while X/Y/Z travel is 860/510/560 mm. The machine uses linear guideways on all three axes and provides rapid traverse rates of 36/36/30 m/min.
The spindle specification includes 7.5/11 kW motor power and a No. 40 (7:24) taper. A direct-driven spindle is listed with a maximum speed of 12,000 r/min, while an optional belt-driven configuration is listed at 8,000 r/min. The arm-type tool magazine holds 24 tools and uses BT40 tool shanks.
Maximum tool weight is 8 kg, and the stated tool-to-tool change time is 2.7 seconds. The machine is equipped with an automatic tool changer, integrated protective cover, automatic lubrication system, cooling system, and portable manual pulse generator.
The supported process description includes milling, boring, drilling, reaming, and tapping in a single setup. Listed controller choices include FANUC 0i-MF variants, Siemens 828D, and Mitsubishi M80B. Published positioning accuracy is 0.008 mm for each axis, with repeatability accuracy of 0.005 mm for each axis.
Buyers should confirm the applicable test standard, measurement method, environmental conditions, and inspection documentation before treating these figures as acceptance criteria.
Before procurement, confirm the exact CNC controller, spindle drive and speed configuration, electrical supply, included tooling and accessories, coolant arrangement, chip-management equipment, guarding configuration, and commissioning scope.
Also verify the final machine footprint, installation clearances, foundation requirements, lifting plan, packaged dimensions, delivery schedule, training arrangements, local service coverage, and the terms of the stated one-year warranty.
If certification is required, request the documents applicable to the exact machine configuration being ordered.
GT | Applications and Buyer Notes
GT is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time question
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VMC850Based on visible page data; confirm exact value in the RFQ.
- T-slots
- 5 × 18 × 100 mmBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Application
- Metal processingBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 3-axis vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- X/Y/Z travel
- 860/510/560 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC850 3-Axis CNC Vertical Machining Center with BT40 Spindle and 24-Tool ATCRequest Quote
VMC850 3-Axis CNC Vertical Machining Center with BT40 8000 rpm Spindle and 24-Tool ATCRequest Quote
Timeway VMC650 3-Axis CNC Vertical Machining Center with 1000 × 420 mm TableRequest Quote
VMC850 5-Axis High-Precision CNC Vertical Machining Center with Fanuc SystemRequest Quote
VMC850 CNC Vertical Machining Center with BT40 Spindle and 24-Tool Arm MagazineRequest Quote
650 mm Travel 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...