GMC1220RV 3-Axis Gantry CNC Machining Center with | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The GMC1220RV is a new 3-axis gantry CNC machining center configured with a movable worktable, fixed beam, double columns, and a gantry frame. The worktable travels longitudinally on the X axis, the saddle moves laterally on the Y axis, and the headstock moves vertically on the Z axis.
Supported machine configuration The worktable measures 1250 × 2000 mm and supports a stated maximum load of 5000 kg. X/Y/Z travel is 2000/1300/750 mm, while the distance from the spindle end to the worktable ranges from 200 to 950 mm.
The BT50 spindle has a stated speed range of 40–6000 r/min, maximum output torque of 460/552 N·m, and main motor power of 12/14.4 kW. Cutting feed is specified at 1–8000 mm/min. Rapid traverse rates are 20 m/min on X and Y and 16 m/min on Z. The tool magazine holds 24 tools.
Supported tool limits include 300 mm maximum length, 110 mm maximum diameter with a full magazine, 220 mm diameter when adjacent positions are empty, and 20 kg maximum tool weight. Tool-to-tool change time is stated as 6 seconds.
Installation and procurement considerations The machine is listed at approxima 0 mm machine coverage area. Buyers should use these figures for initial facility planning, then confirm the final foundation drawing, access clearances, utility requirements, unloading method, and installed configuration before ordering.
Items to confirm with the seller Confirm the CNC control make and model, standard accessory list, coolant and chip-management equipment, probing options, voltage and frequency, foundation requirements, and whether linear encoders are included.
The listed accuracy table identifies optional linear-encoder values, so the contracted accuracy specification and inspection method should be documented. Buyers should also confirm which workpiece materials and machining operations have been validated for their parts.
Customization is stated as available, with local and online after-sales service and a one-year warranty;request written scope, exclusions, response arrangements, commissioning responsibilities, and acceptance criteria before purchase.
GMC1220RV | Applications and Buyer Notes
GMC1220RV is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time q
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- GMC1220RVBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Structure
- Movable worktable, fixed beam, double-column gantry frameBased on visible page data; confirm exact value in the RFQ.
- Table size
- 1250 × 2000 mmBased on visible page data; confirm exact value in the RFQ.
- T-slot size
- 22 × 8 mmBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 3-axis gantry CNC machining centerBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
LM-3227 Double-Column CNC Gantry Machining Center with BT50 SpindleRequest Quote
FD3018 Vertical CNC Gantry Machining Center with 1600 × 3000 Table and BT50 SpindleRequest Quote
VMC650 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
VTE5035 5-Axis CNC Vertical Machining Center with Fanuc 0i-MF(5) ControlRequest Quote
TIMAC G Series Hard-Guide Gantry CNC Machining CenterRequest Quote
PL1375LC 3-Axis Linear-Guide CNC Vertical Machining Center FrameRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...