VMC1890 BT50 Vertical CNC Machining Center with 2 | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VMC1890 is a large vertical CNC machining center configured for metal-cutting operations. Its 2000 × 900 mm worktable supports loads up to 2,000 kg, while X, Y, and Z travels are 1800, 900, and 800 mm respectively.
The specified spindle-to-table distance is 150–950 mm, and the spindle center is 965 mm from the column. The machine uses a BT50 spindle and a three-axis linear-guideway structure.
Listed construction and equipment include HT-300 resin-sand castings, 55 mm linear guideways, stainless-steel brication, coolant equipment, and an electrical-cabinet heat exchanger. The standard-accessory list identifies Hiwin linear guideways and ball screws from Taiwan.
The technical parameter table specifies a 6,000 rpm spindle and 15/18.5 kW main motor, with rapid traverse rates of 30 m/min on all three axes and a cutting-feed range of 1–10,000 mm/min.
The standard-accessory section separa re confirm the exact spindle speed, motor rating, controller, and drive package included in the offered configuration. A 24-tool arm-type magazine is specified, supporting tools up to 120 mm in diameter, 300 mm in length, and 8 kg in weight.
Listed positioning accuracy is 0.012 mm and repeat accuracy is 0.008 mm. Overall machine dimensions are stated as 5100 × 3800 × 3500 mm, with a machine weight of 15,500 kg.
Available options listed for the VMC1890 include chain- or screw-type chip conveyors, a 12,000 rpm direct-drive spindle, spindle oil cooling, through-spindle-center water spray, nitrogen balance cylinder, electrical-cabinet air conditioning, and fourth- or fifth-axis equipment.
Procurement confirmation: Before ordering, verify the final controller and spindle package, included accessories, axis-option scope, electrical requirements, machine foundation and installation needs, delivered accuracy acceptance method, tooling interface details, shipping configuration, and whether optional equipment is installed and commissioned.
Also confirm which certification documents accompany the exact machine supplied and the terms and scope of the stated 12-month warranty.
VMC1890 | Applications and Buyer Notes
VMC1890 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VMC1890Based on visible page data; confirm exact value in the RFQ.
- Application
- Metal cuttingBased on visible page data; confirm exact value in the RFQ.
- Cutting feed
- 1–10000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- Spindle taper
- BT50Based on visible page data; confirm exact value in the RFQ.
- Tool magazine
- 24-t arm typeBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
FD3018 Vertical CNC Gantry Machining Center with 1600 × 3000 Table and BT50 SpindleRequest Quote
GMC1220RV 3-Axis Gantry CNC Machining Center with BT50 SpindleRequest Quote
VMC850/VMC855 Vertical CNC Machining Center with Fanuc 0i-MF ControllerRequest Quote
VTE5035 5-Axis CNC Vertical Machining Center with Fanuc 0i-MF(5) ControlRequest Quote
VMC650 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
PL1375LC 3-Axis Linear-Guide CNC Vertical Machining Center FrameRequest QuoteCNCMillHub related sourcing paths
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...