PM2560H Vertical CNC Double-Column Gantry Milling | RFQ Sourcing Details

Product overview The PM2560H is presented as a new, automatic vertical CNC double-column gantry machining center for metalworking. Its open-sided gantry structure, indexable angle-milling cutter arrangement, and heavy table capacities position it for buyers evaluating large-format milling and boring equipment.

Published series specifications cover SKX2016, SKX2500, SKX3020, and SKX4025 configurations. Across these configurations, X-axis travel is listed from 2,200 to 4,200 mm, Z-axis travel is 800 mm with a 1,000 mm option, and table length ranges from 2,000 to 4,000 mm.

Published table load capacity ranges from 6,000 to 10,000 kg. Because the listing identifies the product model as PM2560H while the parameter table uses SKX model designations, buyers should obtain a configuration sheet explicitly linking the ordered machine to the applicable specification column.

Spindle and machining data The spindle interface is listed as BT-50, ISO-50, or CAT-50. Standard spindle speed is stated as 3,000 rpm, with a 6,000 rpm option. The spindle motor rating is listed as 18.5/22 kW for continuous/30-minute operation, with a 22/26 kW option. Cutting feedrate is stated as 7,000 mm/min.

Published rapid traverse values vary by configuration and are listed as either 12/12/15 m/min or 10/12/15 m/min for the X, Y, and Z axes. The automatic tool changer is listed with a 32-tool standard capacity and 24-, 40-, or 60-tool alternatives.

Maximum tool length is 350 mm, maximum tool weight is 20 kg, and the stated maximum tool diameter is 125 mm with adjacent pockets occupied or 245 mm with adjacent pockets empty.

Accuracy and utilities Published accuracy data includes positioning accuracy of ±0.005 mm per 300 mm and ±0.015 mm over full travel, plus repeatability of ±0.003 mm. The same table also contains separate P0.03/P0.035 and 0.025/0.028 figures whose exact model mapping should be clarified before purchase.

The machine is listed as requiring 65 kVA of power and pneumatic input pressure of 6.5 kg/cm². Net weight varies by configuration, with paired values ranging from 20/22 to 28/30 tons. Buyers should confirm whether each pair represents standard and optional construction or another configuration distinction.

Configuration Listed equipment includes automatic lubrication, a spindle oil cooler, through-spindle air blast, a manual pulse generator, working lamp, three-color alarm lamp, RS-232 interface, electrical-cabinet heat exchanger, water and air gun interface, cutting coolant system, twin-auger chip removal, and a belt-type chip conveyor with cart.

Additional listed items include an X-axis Heidenhain linear scale, sub-table, three-axis manual pulse generator for mold processing, coolant through the spindle at 20, 40, or 70 bar, coolant-through-tool-holder interface, electrical-cabinet air conditioner, transformer, oil skimmer, and oil mist collector.

The supplied information does not clearly distinguish standard equipment from optional equipment for every item, so the final quotation should identify each included component. Procurement points to confirm Before ordering, request a signed technical schedule for the exact model and configuration.

Confirm the applicable X, Y, and Z travels;table dimensions and load rating;distance between columns;spindle taper, speed, and motor rating;controller;tool-magazine capacity;accuracy acceptance method;machine weight;and installed footprint.

Warranty information in the supplied material is inconsistent, stating both three years and 12 months, so the governing warranty duration, exclusions, service response, and parts or freight responsibilities should be documented in the purchase contract.

Buyers should also confirm site preparation, electrical voltage and frequency, air requirements, foundation drawings, transport dimensions, commissioning scope, operator training, acceptance testing, and the division between standard and optional accessories.