LEYO U-200T 5-Axis Simultaneous Vertical CNC Mach | RFQ Sourcing Details

The LEYO U-200T is a 5-axis simultaneous vertical CNC machining center designed for metal-cutting operations and multi-surface machining. Its compact vertical configuration combines 600 × 400 × 320 mm X/Y/Z travel with a Φ260 mm rotary table.

The listed maximum workpiece diameter is 300 mm, the table load limit is 30 kg, and the tilt-axis rotation range is ±110°. Motion and control The machine uses closed-loop CNC control and a Lynuc controller with RTCP functionality. Listed X/Y/Z rapid traverse rates are 48/48/48 m/min, while rapid feed is 15 m/min.

The specification states X/Y/Z positioning accuracy of ±0.01 mm and repeat positioning accuracy of ±0.005 mm. A/C positioning accuracy is listed as 6 arcsec. The A-axis and C-axis rapid movement ratings are 200 rpm and 300 rpm respectively.

Spindle and tooling The U-200T has a direct-drive BT30 spindle with a stated speed range of 0–20,000 rpm. Servo main-motor rated power is 3.7 kW, with 5.5 kW listed as the 30-minute maximum power. Continuous rated torque is stated as 11–22 Nm.

The machine is equipped with a 21-tool servo magazine, uses BT30 tool holders, and specifies P30 45-degree pull studs. Spindle end-face and near-end radial runout are each listed as 0.003 mm. Machine configuration Ball linear guideways are specified with four X30 sliders on each of the X, Y, and Z axes.

The distance from the spindle center to the column guide surface is 420 mm, and the spindle nose-to-turntable distance is 90–410 mm. The machine dimensions are listed as 2350 × 1950 × 2750 mm, with a machine weight of 3000 kg. Shipping data lists a 235 × 200 × 275 cm package and 3600 kg gross weight in a wooden case.

Potential production fit The supplied application information identifies automotive parts, medical-device and implant components, electronic and communication connectors, precision hardware and instrumentation, and aerospace or defense components as example fields.

These examples indicate intended use categories;buyers should validate every actual part, material, tolerance, tooling strategy, and regulatory requirement through machining trials and technical review. Procurement questions to confirm Before ordering, request a finalized configuration sheet and acceptance protocol.

Confirm simultaneous 5-axis capability, installed controller and RTCP options, rotary-axis torque data, spindle power duty cycle, tool-magazine arrangement, electrical supply, coolant and chip-management equipment, probing options, and all included accessories.

Ask how the stated linear and rotary positioning figures will be measured during acceptance.

Warranty information in the supplied details is inconsistent—one section states one year, while another states a general period of 13 months after the bill-of-lading date—so the applicable coverage, exclusions, response process, and replacement-parts terms should be written into the contract.

Also confirm production lead time, customization scope, export documentation, packaging, freight responsibilities, installation, commissioning, operator training, and service availability for the destination.