KMC-850 3-Axis Vertical CNC Machining Center with | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The KMC-850 is a 3-axis vertical CNC machining center intended for metal-processing operations. Its listed configuration combines 800 mm X-axis travel and 500 mm Y-axis travel with a 1000 × 500 mm worktable rated for a maximum load of 500 kg.
The spindle uses a BT40 taper, while the arm-type magazine accommodates 24 tools. Listed maximum tool limits are 8 kg in weight and 300 mm in length. The machine is described as using Meehanite castings that are tempered for structural stability.
Its feed system uses servo motors, and the linear guide arrangement is intended to provide smooth, high-speed movement. Fully enclosed stainless-steel covers protect the three-axis guideways from chips.
The electrical enclosure is described as dust resistant, and the wire openings are waterproof to help limit the entry of oil and gas. Published feed data lists X/Y/Z rapid traverse at 48/48/48 m/min and cutting feed from 1 to 10,000 mm/min.
The KMC-850 spindle listing shows 10,000 rpm with a direct-connected 12,000 rpm configuration also referenced, along with 5.5/7.5 kW motor power. These configuration-dependent values should be confirmed on the final technical quotation.
Inspection information states that each machine undergoes laser and circular inspection to check machining accuracy. The listing also identifies closed-loop CNC control, a stated processing precision range of 0.01–0.02 mm, and CE and ISO 9001 certification.
Buyers should request the applicable inspection records, certificate scope, test conditions, and acceptance protocol for the exact machine offered. Important procurement note: the source information is inconsistent about Z-axis travel.
One specification field states 550 mm, while the KMC-850 comparison table states 500 mm and gives a spindle-nose-to-worktable range of 120–670 mm. The final Z travel must therefore be resolved in the signed specification. Customization is listed as available.
The machine is described as new and supplied with a one-year warranty and one year of after-sales service. Packaging is listed as a wooden box or a customized package.
Before purchase, confirm the CNC controller, spindle speed and motor option, electrical standard, coolant and chip-management equipment, tooling interface details, included accessories, installation requirements, commissioning scope, training, delivery schedule, packing dimensions, final machine weight, and warranty coverage in writing.
KMC-850 | Applications and Buyer Notes
KMC-850 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- KMC-850Based on visible page data; confirm exact value in the RFQ.
- T-slots
- 5-18 × 80Based on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Cutting feed
- 1–10,000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 3-axis vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- Spindle taper
- BT40Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10pcs Tnmg160404l R Cnc Lathe Turning Inserts Cermet Inserts Tnmg For SteelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Multi Spindles 3 Heads Dsp Vacuum Table Mdf Cutting Furniture Cabinet Atc 3d Wood Working 1325 2This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Cnc Vertical Machining Center Vmc Model Ysv 1060This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC850 3-Axis CNC Vertical Machining Center with BT40 Spindle and 24-Tool ATCRequest Quote
VMC850 3-Axis CNC Vertical Machining Center with BT40 8000 rpm Spindle and 24-Tool ATCRequest Quote
VMC650 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
TAIZ TZ-U320 Vertical 5-Axis CNC Machining Center with 320 mm Rotary TableRequest Quote
PL1375LC 3-Axis Linear-Guide CNC Vertical Machining Center FrameRequest Quote
LEYO VMC1165 5-Axis CNC Vertical Machining Center for Metal CuttingRequest QuoteCNCMillHub related sourcing paths
High Precision Machining Projects
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...