KDVM1580L BT50 CNC Vertical Machining Center with | RFQ Sourcing Details

Product overview The KDVM1580L is a new CNC vertical machining center specified for metal-cutting operations. Its detailed specification table lists travels of 1500 mm on the X axis, 800 mm on the Y axis, and 700 mm on the Z axis.

The machine has a 1700 × 800 mm worktable with five 22 mm T-slots spaced at 140 mm and a maximum listed table load of 1500 kg. Spindle and machining system The spindle specification includes a BT50 taper, Φ155 mm spindle bore, 15/18.5 kW power rating, and speed up to 6000 rpm.

Rapid travel is listed as 12 m/min on each of the X, Y, and Z axes. The corresponding axis motor torque figures are 22, 30, and 30 Nm. The control configuration is described as closed-loop CNC/MNC. Tool handling and accuracy A 24-tool automatic tool changer is listed.

Maximum tool diameter is Φ105 mm when adjacent pockets are occupied and Φ200 mm when adjacent pockets are empty. The stated limits are 15 kg tool weight and 350 mm tool length, with a listed tool-to-tool change time of 2.91 seconds.

Positioning accuracy for the X, Y, and Z axes is stated as no more than 0.006 mm, and minimum input is 0.001 mm. Installation information The listed distance from spindle center to column is 810 mm, while the spindle-end-to-table range is 130–830 mm.

Overall dimensions with the automatic conveyor are 5600 × 3350 × 3000 mm, and listed net weight is 13,000 kg. These figures can help buyers plan floor space, access, handling equipment, and foundation requirements, but the final installation drawing should be confirmed before site preparation.

Points to confirm before procurement The source information is inconsistent on Z-axis travel: a basic-information section states 650 mm, while the detailed specification table states 700 mm. The maximum table load is also summarized elsewhere as a 1000–1500 kg range, although the detailed table lists 1500 kg.

Buyers should obtain a configuration-specific technical sheet and written confirmation of these values.

Also confirm the CNC controller brand and model, electrical supply, spindle interface details, coolant and chip-management equipment, guarding, lubrication system, probing options, included tooling, commissioning requirements, and acceptance-test procedure.

Certification listings include CE and ISO 9001, but buyers should request the applicable documents and verify that their model, configuration, and destination-market requirements are covered.

Warranty, lead time, delivery scope, packaging details, service arrangements, and customization deliverables should be agreed in the purchase documentation.