Vertical Driling CNC Milling Machine CNC Machinin | RFQ Sourcing Details

. . Model NO.

Vmc2015 Movement Method Linear Control Control Method Semi-Closed Loop Control Numerical Control CNC/MNC Processing Precision 0.02~0.03(mm) Performance Classification High-End CNC Machine Tools Certification CE, RoHS, ISO 9001 Condition New Transport Package Wooden Box Packing Trademark Longkai Origin Suzhou, China HS Code Production Capacity 1000/Year I,Main technical parameters Item unit LK-2015V operating range X-axis travel (left and right) mm 2000 Y-axis travel (front and rear) mm 1500 Z-axis travel (up and down) mm 750 Distance from worktable to spindle end face mm 170-920 Distance from the front end of column to the center of main shaft mm 500 Workbench Table area (L * W) mm 2100*1200 maximum load kg 3500 T-groove (width * spacing * number of grooves) mm 22*150*7 X / Y / Z axis rapid feed m/min 48*48*48 Spindle specification Spindle speed rpm 6000 Taper hole form and installation size kg BT50∮140(external diameter) Transmission mode (1:1) mm Belt Recommended motor parameters for spindle kW 7.5 Accuracy (x / Y / z) positioning accuracy mm ±0.003/300 Repeated positioning accuracy mm ±0.003/300 Other information Three axis power kw 2*2*3 system FANUC --- can change to Siemens 828D Tool magazine T 24 Machine size floor space (L * w * h) mm 2700*2400*2500 Pressure source kg/cm² 8 Power capacity Kva 20 machine weight kg 26000 II.

Structural performance of machine tool 1. Fuselage design The fuselage and saddle are reinforced by mountain shaped ribs, with the shortest force streamline, ensuring the best rigidity of the fuselage.

Based on the excellent engineering design, the stiffeners of the base and column of the machining center can resist the torsion and damping, and transfer the cutting vibration to non Cutting area.

The column is designed with torque tube, which can provide excellent rigidity, bending and torsion resistance Ultra wide base design, At the same time, lower the center of gravity of the base and adjust the center of gravity of the machine tool to the best stable height.

The span at the bottom of the column is widened to improve the stability of the machine tool. 2. spindle head The .

Independent cooling system is built in the spindle head to stabilize the spindle continuously The head heat is in a reasonable range, which reduces the thermal extension of the spindle and ensures the machining accuracy. 3.

counterweight In response to the processing requirements of different models, the following counterweight methods are adopted: Counterweight: low failure rate and long service life;Nitrogen counterweight: rapid action, no noise, greatly improved processing accuracy, increased machine life;No counterweight: in order to meet the requirements of high speed and high sensitivity processing, the machine tool adopts the method of no counterweight, and enhances the requirements of servo motor and screw, Z-axis with brake, to ensure the accuracy of the machine tool is stable and lasting, and increase the service life.

4. screw rod It adopts imported grinding level pre drawn double nut screw rod to eliminate reverse clearance. After heat treatment, it has high rigidity, wear resistance, torsion resistance and long service life, which guarantees high machining accuracy of the machine. 5.

AC servo motor Adopt original imported from Japan, super high performance servo motor, provide stronger power when heavy cutting. In the case of low feed, high torque can still be maintained. Higher than 10000 (pixel) resolution and closed-loop position feedback ensure high accuracy.

High quality coupling ensures that the screw rod moves with the axis of the motor. 6.

Lubrication system The whole machine adopts a positive displacement lubrication system and a de pressurized oil pump, with stable pressure and flow, which effectively transports the oil to each lubrication point and provides uniform forced lubrication for each slide surface, so as to ensure the accuracy and service life of the machine tool.

Chip remover system III. functions of CNC system CNC system is Mitsubishi or FANUC system. Equipped with RS232C interface, with data transmission function.

Three axis simultaneous movement Minimum instruction unit: 0.001mm Fast displacement speed adjustment Feed rate adjustment Suspend Automatic origin reset G28 Second origin reset G30 Hand artery wave generator Workpiece coordinate system G54-G59 Drilling fixed cycle G73, G76, g81-g89 / g80 Rigid tapping g84, G74 Air run Emergency stop MDI function Selective single node skip Single section implementation Program suspension Manual control function: manual rapid feed, inching feed, hand wheel feed Tool length correction G43, g44 / G49 Tool radius correction G41, G42 / G40 Memory compensation of pitch error Back gap correction Arc interpolation Linear interpolation Screw interpolation Search for program number and serial number Sub process call Conversion of public and British system Transmission interface, DNC capacity Different alarm display Ladder diagram display Macro programs and variables Mirror function Simple program graphic display function NC control language: Chinese, English, Japanese and other five languages are optional Monitoring function: full coordinate display, spindle speed display, spindle load display, PLC ladder circuit monitoring Protection function: over travel protection, overload protection, interlock function.

IV. attached data Accuracy inspection table A set of instructions for Mitsubishi or FANUC A set of Chinese operation instructions V. installation and commissioning 1. Please install the three-phase 380V power supply, 50. Hz power unit and suggest to attach the voltage regulator. 2.

After the equipment arrives at the factory, open the box together with our representative for inspection.

If any damage or shortage is found, please inform our company immedia ment and other work, and then the supplier shall install fine adjustment and training, and your company shall inform our company to send personnel at least 7 days in advance. 4.

Please assist our installation and commissioning personnel to arrange accommodation, meals and transportation, 5. Please designate the operator and maintenance personnel of the machine, and assign special personnel to assist in the installation and commissioning of the machine. 6.

After the acceptance of the whole machine, your company shall sign the acceptance certificate of installation and debugging in real time, in duplicate, one for each party. VI.

skill training Serial number Item Training content 1 operation (1) shutdown and startup steps;(2) introduction of key functions of operation panel;(3) explanation of the start, interruption and end of the processing procedure;(