CA6150 CA6250 Gap Bed Lathe Machine, lathe machin | RFQ Sourcing Details

Lathe Machine characteristics: 1 Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.

2 Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the agreeability and stability of the machine.

3 The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.

4 Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.

5 Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance. 6 The machine adopts high strength four station turret shank size: 25x25mm.

Lathe Machine Application: 1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.

2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable. 3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.

4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.

5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability. Lathe Machine Specifications: Specifications CA6150 CA6150B CA6150C CA6250 CA6250B CA6250C Max.

Swing over bed 500mm Max. Swing over carriage 300mm Max. swing in gap -- 720mm Effective gap length -- 210mm Max. length of work piece 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm Width of bed 400mm Section of turning tool 25x25mm Spindle Spindle speeds 10-1400rpm/16-1400rpm(24steps) Hole through spindle 52mm.

(80mm).

[105mm] Spindle taper NO.6(MT6)(Φ90 1:20)[Φ113 1:20] Feed Number of feeds 64(kinds)(for each) Range of metric threads（kinds） (1-192mm)44kinds Range of inch threads（kinds） (2-24tpi)21kinds Range of module threads（kinds） 0.25-48(Moduie39kinds) Range of pitch threads（kinds） 1-96DP(37kinds) Cross slide travel 320mm Top slide travel 140mm Tailstock Max.

tail stock spindle travel 150mm Tail stock spindle diameter 75mm Taper of tail stock spindle center hole NO.5(MT5) Main motor 7.5KW(10HP) Packing dimensions (L*W*Hmm) Overall dimensions for750mm 2550x1140x1750 Overall dimensions for1000mm 2700x1140x1750 Overall dimensions for1500mm 3200x1140x1750 Overall dimensions for2000mm 3700x1140x1750 Overall dimensions for2200mm 4030x1140x1750 Overall dimensions for3000mm 4850x1140x1750 Overall dimensions for4000mm 5800x1140x1750 Weight (kg) Length G.W N.W.

Weight for 750mm Weight for 1000mm Weight for 1500mm Weight for 2000mm Weight for 2200mm Weight for 3000mm Weight for 4000mm